Mesh Network Creating Situational Awareness During Wildfires
The first few days of a wildland fire are often met with a lack of connectivity for the first responders on the scene, and that means creating incident maps and situational awareness on the fly in areas that aren’t well documented.
That was the case recently when Ari Delay, La Honda, Calif., fire chief, began battling a 2,000-square-foot blaze in Alturas at the northeastern end of California.
But it was made easier with a mesh network that he immediately deployed that connected each of the five engines from areas around the state that met to combat the blaze. The network was able to allow Delay, as strike team leader, to communicate with the other teams about sections of lines that had to be cut in a remote part of the state with poorly marked forest service roads.
“We didn’t have a lot of incident maps, and that is typically our problem until we get three to seven days into the incident,” Delay said. “The crews were working on a section of line and there was confusion about where the lines were placed. I marked [on a map] some of these forest service roads and pushed it out to their devices on the network.”
The network consists of goTenna Pro units that connect via radio waves and operate independently of wireless internet and traditional cell service. Users connect to the system via their phones and the goTenna Pro app. It pairs with an iOS or Android device through Bluetooth, creating a mesh network that allows for one-to-one or one-to-many messaging and the ability to create a private network.
“We created a low-power, low-cost, long-range mobile mesh network that leverages the phones users have and unlocks the way to communicate with those phones regardless of what’s happening with traditional networks,” said goTenna CEO Daniela Perdomo. “So, if there’s no phone, satellite or Wi-Fi connectivity, the mesh network will still function.”
The network is used in Colorado wildfires as well, and was used in a recovery effort after Hurricane Michael in Florida. Perdomo related an incident during a Colorado wildfire when a firefighter became detached from his crew. With the network, his crew was able to watch on their phones his “dot” on a map moving toward safety and didn’t need to conduct a search.
In Florida, the Texas Task Force 1 Urban Search and Rescue team equipped a multitude of agencies with goTenna Pro units, creating a mesh network and interoperability during the recovery phase in Mexico Beach.
One of the main responsibilities Delay has as a strike leader is to keep track of his crews. “For me as in incident commander to say I don’t know where an employee is, is not a good answer,” he said. “When we get into some of those large fire situations, we could have 5,000 to 10,000 people working on an incident and you’re required to know where your employees are.”
Delay first experimented with the network with an investment of his own money. He has six of the units and deploys them up and down the state as he’s dispatched to wildfires. “It allows you to communicate when radio traffic gets busy,” he said. “It allows us to create a backhaul channel for nonessential transmissions and also for those points and polygons on a map that we communicate back and forth.”
It’s especially useful during the early stages of the fight when crews are establishing communications and building situational awareness as they go. “Before this, honestly, in a disconnected environment in the early stages of a fire, we were left to our own devices,” Delay said.
The range between units can vary depending on the terrain. Delay said typically in the VHF environment he’s most familiar with, five miles between devices is usually standard. A deployment in Puerto Rico is scheduled, where the units will be deployed on mountaintops and other higher locations to cover the island.
Learn more about CenturyLink’s public safety IT solutions.
This article is written by Jim McKay from Emergency Management and was legally licensed via the Tribune Content Agency through the NewsCred publisher network. Please direct all licensing questions to email@example.com.
This blog is provided for informational purposes only and may require additional research and substantiation by the end user. In addition, the information is provided “as is” without any warranty or condition of any kind, either express or implied. Use of this information is at the end user’s own risk. CenturyLink does not warrant that the information will meet the end user’s requirements or that the implementation or usage of this information will result in the desired outcome of the end user.